2 older Atlas engines need simple decoders
I have 2 older Atlas diesels that have old soundtraxx decoders in them and they just don't do well on my layout. I got these on craigslist years ago with the sound in them. The GP-38 is a dual mode and I have the original board with a 4 pin plug in it plugged into a 6 spit spot. Can I just wire that back in and it should run on DCC?
My Gp-40 I also have the original board for that and it has a a 8 pin dummy board plugged into the board in that I see, so I can just buy a digitrax decoder and plug that in for that one? I like the digitrax because they have that switching mode you can use as I run a switching layout.
Both engines are in nice shape and I would like to be able to use them on the layout.
Last edited by nrscroller; 03-14-2019 at 11:27 AM..
Reason: change text