Good loco brands? - Model Train Forum - the complete model train resource
Model Train Forum - the complete model train resource

Go Back   Model Train Forum - the complete model train resource > Model Train Workshop > Beginner Q & A
Forgotten your password?

Beginner Q & A If you're new to model trains, stop in here!


Reply
 
Thread Tools Display Modes
Old 10-08-2019, 09:16 PM   #1
RonK9977
Hobo
 
Join Date: Oct 2019
Posts: 22
Good loco brands?

Can anybody tell me their experiences with BRANDS of N Scale diesel and steam locos? I am looking for good quality per say>mostly deisels but would like to buy a good steam loco as well!
Thanks
RonK9977 is online now   Reply With Quote
Sponsored Links
Advertisement
 
Old 10-09-2019, 04:07 AM   #2
gimme30
Gang Labourer
 
Join Date: Jul 2018
Posts: 83
I'm new-ish to N scale and only own 3 different brands, so take this with a grain of salt, but of the 3 I'd rate Kato first, Atlas second and Bachmann third. Here's why:

Each Kato has performed flawlessly out of the box, pulls well and runs quietly. I couldn't tell you if they're prototypically accurate or not but, not being a rivet counter, they look good enough to me.
My wife rode the Super Chief and just loved it, so naturally when we ran across an A/B set of F7's they wound up coming home with us.
That was over 20 years ago, and they sat in a box until this year when I finally got around to building a layout.
Kato re-released that same set earlier this year so I picked them up and sure enough the new units look and run exactly the same as the old. 3 of the 4 run at exactly the same speed, with only one b unit running a smidge faster than the rest.
My point being, while they may or may not be the best, their quality certainly appears to be consistent.

At sane speeds my SD70 will negotiate the tight curves on my layout, and the little C50 (a Japanese model) pulls far more than it should for it's size and weight.

One last important difference-None required breaking in to run smoothly.

My experience with Atlas is a little different. I only own 3 of their engines, all C420s. One runs a little quieter than the Katos, another about the same, and the third is much noisier. They all run at vastly different speeds but it doesn't seem to matter much when they're lashed together. The third, (purchased separately) arrived DOA and had to be sent back for replacement. Still, I like them and wouldn't hesitate to recommend the brand.

And then there's Bachmann. From what I've read they used to be considered junk but have improved in recent years. I don't know if that's true but the models I have are definitely not on par with Kato or Atlas. The 2 diesels will not run smoothly at low speeds and one is loud as h e double hocky sticks. The 0-6-0 broke an axle at less than 20 hrs run time and never ran well to begin with. The K4 actually runs great, very smooth, very quiet, but when starting from a complete stop, STOPS every time it makes the 'chuff' sound. (once it gets going this doesn't continue)
The Baldwin I just purchased is going back to repair a nasty wobble.
So yeah, not a huge fan here. BUT, when it comes to choices, Bachmann is king-nobody else offers as extensive a line-up. And since they're cheap I'll continue to take my chances with them. But I wouldn't recommend them to anyone else.

Unfortunately we're very limited for steam choices. Bachmann of course has the largest selection, Atlas currently has none, and Kato offers exactly two, which are the same except one is a freight version and the other passenger. Broadway limited has several that appeal to me visually but they get such mixed reviews I haven't been willing to drop the kind of coin they want.
gimme30 is offline   Reply With Quote
Old 10-09-2019, 09:33 AM   #3
RonK9977
Hobo
 
Join Date: Oct 2019
Posts: 22
Thanks

Thanks for the info! I thought kato and Atlas were the best to take a shot with
RonK9977 is online now   Reply With Quote
 
Old 10-09-2019, 11:56 AM   #4
Fire21
Station Master
 
Join Date: Mar 2014
Location: Wyoming, USA
Posts: 3,898
Scales Modeled: N-Scale.
I agree with gimme30 on the Kato brand. They just can't be beat. My two PA-1s run really well. Of course every manufacturer builds a lemon now and then, but just about everyone on this forum agrees about the good quality of Kato. And, by the way, everyone here likes Kato unitrack too.

I have no experience with Atlas locos.

I have a Bachman 2-6-0 steamer and an RS-3 diesel, both with DCC. The 2-6-0 runs well, but one axle on the tender kept falling off. I wrote to Bachmann, and they quickly sent a new truck for it. The RS-3 runs very well, and creeps amazingly slowly. Both are quiet.

I have level track, so can't speak much about their pulling power. All do well with moderately-sized trains.
__________________
FAR TOO MANY Americans are proving NOT to be worthy of the incredible bounty of their unbelievable Country, which was given to them by the Blood, Treasure and Sacrifice of those before them.
...Howard Galganov
Fire21 is offline   Reply With Quote
Old 10-09-2019, 03:58 PM   #5
traction fan
Station Master
 
traction fan's Avatar
 
Join Date: Oct 2014
Location: San Diego
Posts: 3,079
Scales Modeled: N
West Kato locomotives

Quote:
Originally Posted by RonK9977 View Post
Can anybody tell me their experiences with BRANDS of N Scale diesel and steam locos? I am looking for good quality per say>mostly deisels but would like to buy a good steam loco as well!
Thanks
RonK9977;

I have been in N-scale for many, many, years. In all those years, I've never encountered a bad Kato locomotive. I recommend them highly!
Kato does not make many steamers, but they have a good selection of diesels. Their F-units, at least the earlier DC models that I have, are noisier than their other locomotives, but they run well, and look good. running them at slower, more realistic, speeds quiets the noise considerably.
Their 2-8-2 Mikado Steam locos are great runners, but I found they are not comfortable with curves tighter than 16" radius. They will go around tighter curves, but they tend to derail often enough to irritate me. I changed from a 12" minimum radius to 16" because of this problem.

FYI: Some "Atlas" locomotives are actually made by Kato. Others are not, but generally Atlas locos run well.

I don't buy Bachmann. I remember the old Bachmann junk too well. Newer Bachmann locos are said to be much improved. Still, even now, whenever you see a post about somebody having problems with a locomotive, it's usually a Bachmann. I just don't trust the brand.

Traction Fan
__________________
To Puget sound, Electrified!
traction fan is offline   Reply With Quote
Reply



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


» Visit These Sites:
LGB World

Or Our European Train Website ModelRailForum




All times are GMT -5. The time now is 09:09 PM.


Powered by vBulletin®
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.