Model Train Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 22 Results
  1. My Layout
    Here is my new layout design in HO, using AnyRail and running it in TrackPlayer. Previously had an N scale layout. This is designed for alot of industrial switching. Small room was a ch allenge!!!
  2. O Scale
    Any recommendations on where to find O scale bridges that won't break the bank? (Does such a thing even exist?) I'm having difficulty finding anything over 18-24", and even then they seem to run $200+. There is a nice 30-incher on Amazon for the low low price of $328. I took some screen...
  3. HO Scale
    Space restrictions(curves) on my 20-year-old HO layout have forced me to use 4-axle diesels. I decided to refresh my scenery which led to a major rebuild. I model a prototypical east coast RR so I don't worry about tall cars, However, I have an approach to a bridge over the mainline below that...
  4. HO Scale
    Hi everyone. I'm still finalizing my HO track plan & there's a spot where a bridge will carry one track over another. I wish to minimize the vertical separation to avoid steep grades in the vicinity, since the tracks have to meet up again. Right now I've got it down to just over 4" railhead to...
  5. Member Classifieds
    Micro Engineering (model #75-521) 50-foot thru girder bridge. Injection molded, pre-colored (dark gray) styrene. Can be built as either a single- or double-track bridge. Comes with two concrete decks for open-deck or ballasted construction. I've kept the two code 83 bridge tracks, however...
  6. HO Scale
    So a while ago I was making a bridge from scratch. I didn't like the way it turned out, so I purchased a kit from Walthers and it allows or modern-day cars with double stacks to go thru. The track for the train is code 100. My question is what code (100 or 83) should I use for the guide rails.
  7. Structures Forum
    Here is one in currently working on. Miss measured the amount of material I needed. Oh well, back to Hobby Lobby.
  8. HO Scale
    Hi all, I'm a relatively young HO railroader and brand new to this forum. I was just wondering if anyone around here has ever tried to make a curve on one of Miller Engineering’s double track city viaduct kits. I have a double track with an 18"R outside and 15"R inside curve; I have the...
  9. O Scale
    The DAVID STOCKWELL BRIDGE. Limited Edition/Serial #1 I was going to name it The DAVID STOCKWELL MEMORIAL BRIDGE But it can't be a Memorial Bridge, as David is alive and well.:D Or can I? Would that be OK?:confused: I like the sound better. If I get one more bridge, I could name it The DAVID...
  10. Structures Forum
    I am planning on building a section of my layout using this type of via duct and would like to have the lights around the arch. Mine will be in a curve around one end of my board. Of course probably not as detailed. I plan on scratch building the structure using foam board and being about 4...
  11. Member Classifieds
    Purchased within the past year at Dollhouses, Trains, & More in Rhonert Park, CA. List price by manufacturer web site is $74.98 but the sticker price (on the box) is $64.98. My project is done and this is left over. It has never been opened - still in original bubble wrap. $39. Hope you can use...
  12. O Scale
    I am going to post bridges in this thread. Not all at once. I will start with this, as I don't think I posted it on the site yet. Colber, I don't know if it has a number. This company made accessories for Lionel and Marx trains. They are similar to both companies' accessories and can be wired...
  13. Railroad Bridge

    Refer to title
  14. O Scale
    This is set up for my buddies Christmas and New Years open house in the back room of his law office. I built the 2 ceilingtrains.com bridges for his old Lionel's and the big 8'X16' table below has all scales of trains for the kids to see. I really like that big Standard gauge in the front. I...
  15. HO Scale
    so i have decided that all the way around my bedroom is going to be train track.............the shelf itself will be 4 inch in width and at 3 corners will be a 2 foot by 2 foot square which wil be cut at a radius to so it doesnt look stupid at each corner i will have little a little town as you...
1-19 of 22 Results
Top