Model Train Forum banner
o22 switches
1-2 of 2 Results
  1. O Scale
    I'm revitalizing about a dozen O22 switches. I've read many posts about "lubricating" various parts of the switch but am not clear about which type of oil or lubricant to use, particularly when it comes to the solenoid? My most common issue is that the switches do not seem to open and close...
  2. O Scale
    I am going through some O22 switches using the steps outlined by Servoguy at http://cs.trains.com/ctt/f/95/t/1646...t=DESC&pi350=1 In Step 3 - "Solder all the crimp connections on the bottom side of the switch" ------It is suggested that there are 6 places to solder the rails where they were...
1-2 of 2 Results
Top