[ennisdavis]

Do they make a clip to tie track to the switch?

 

[T-Man]

No. The best way is to screw down the track. If you can't and are just looking for temporary fastener elastics work between track but I am not sure about the switch attachment. You could set them on cardboard and use a glue gun. The correct way is to just tighten the pins into the track using a special pair of pliers.

 

[CSXJOE]

Actually, yes there is.


https://www.amazon.com/Lionel-12743-Gauge-Track-Clips/dp/B0006O1ZY0

 

[gunrunnerjohn]

Those are O-gauge track clips, but they won't work on the O22 switch itself, the plastic base kinda' gets in the way.

 

[CSXJOE]

John, not true, left pic shows clips installed, right pic shows the part of the switch that engages the clip.

The clips also work on crossings and is operating tracks.

 

[santafe158]

Thanks for sharing that Joe. I was unaware that was the case and I'll definitely be putting clips in those locations the next time I put my Postwar set up.

 

[T-Man]

WOW That is one for the Lionel Trivia Books!

 

[Pingman]

If asked, I would have sworn GRJ was right; so, thanks for the photos Joe--I would have been wrong.

 

[gunrunnerjohn]

How about that Joe, I would have never thought they'd work. That is one for the trivia books, T-Man is right! I would have bet money on them not working, but I have an out, I don't have any O22 switches to look at.