Model Train Forum banner

127,137 Station Roof

1223 Views 6 Replies 3 Participants Last post by  T-Man
The building started on this thread. I wanted to show it off before I shipped it out. The chimneys were the challenge I made six. Then I had to use a larger one since one hole was cut too large.
When I do sheet metal with everbend you need to add a correction or trim the piece square. With all the little annoyances the piece came out just fine, sometimes I surprize myself. So Jim it's all ready to paint. It will come apart but remember the chimneys only go in, one hole one way.


See less See more
1 - 2 of 7 Posts
The roof is looking good! In place.:)
I got your package. Thanks very much. I'll post more about the contents later.
I guess I don't have to ask if you like the roof.:D
1 - 2 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.