Model Train Forum banner
1 - 2 of 2 Posts

· Registered
18 Posts
Discussion Starter · #1 ·
Hi guys,

I was wondering if anyone has any advise, from my other post you may know I have been trying to get the 2023 in shape. With my ADD I start doing one thing then start another. I am now trying to get the horn working. I replaced the battery bracket and cleaned everything.
It seems the horn wants to work but it's not, you can see the relay pulling up the contact to complete the circuit but the horn doesn't work. I hook the horn directly to the transformer and it works so there is a problem somewhere else.
I replaced a few of the wires for the coupler and light and made them a little longer than they originally were, would that cause any problems? I looked at the Greenberg book and all the wires seem to be in the correct location with the separators between each wire contact. Any help would be appreciated.

1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.