Model Train Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
724 Posts
Discussion Starter #1
I have two of these both are wired different and rear trail hook up is different the picture i will show is there a clip supposed to hold it in. Thanks al
 

·
Registered
Joined
·
5,919 Posts
I have two of these both are wired different and rear trail hook up is different the picture i will show is there a clip supposed to hold it in. Thanks al
I checked your picture, and that is the way it's supposed to be..As for the wiring, there should be a plug that goes into the tender.
 

·
Registered
Joined
·
5,613 Posts
I think Broke has one of those. Maybe he can help you with the wiring from the tender.
I think the reverse unit is in the boiler so probably only 2 wires from tender.
 

·
Registered
Joined
·
724 Posts
Discussion Starter #4
The one in picture works actually both do one in picture does not have reverse unit it has a switch in back of boiler. Thankyou for your help.
 

·
Registered
Joined
·
92 Posts
Both flyernut and mopac are correct. A two step reverse unit in the boiler and two pronged plug to the tender. Replacement plugs are available from TrainTender (with wire leads) or Portline (plug and push in prongs only). Wiring diagram is here. Barry
 

Attachments

1 - 6 of 6 Posts
Top