Model Train Forum banner
1 - 4 of 4 Posts

· Yard Master & Research
12,499 Posts
I have an old one that has four screws to hold the gondola to the frame. One problem with these is that they are very heavy.

Trucks are usually c clamps or rivets. I use a srew,and a nut. Try not to melt the plastic when removing the rivet.

OH the tabs have to be bowed to be shortened. Pry the center Up while holding down the end.
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.