Model Train Forum banner
1 - 7 of 7 Posts

·
Premium Member
Joined
·
5,758 Posts
Discussion Starter · #1 ·
Used, without couplers, side rails, etc
With sound, $50.
Can't beat the price, but lots of work.

Unboxed... no damage, but missing critical stuff.
I made brass wire side rails (a major p.i.t.a.).
Not sure of the handrail config over the battery box, but I went to the hole in the cab. There's still a stanchion hole below the box, but I'm not gonna lose sleep over it.
Inexplicably there's no lightbulbs but it runs normally. Bernie will troubleshoot, and add LED's.
Still needs couplers... (add another $1.75 for 148's).
AtlasU33C-8611_003.jpg
AtlasU33C-8611_008.jpg
AtlasU33C-8611_010.jpg
AtlasU33C-8611_016.jpg
AtlasU33C-8611_017.jpg
AtlasU33C-8611_018.jpg
 

·
Registered
Joined
·
4,795 Posts
Very nice. That's a lot of detail for $50. Nice find.
 

·
Registered
Joined
·
4,795 Posts
Especially if it's ESU.
 

·
Premium Member
Joined
·
5,758 Posts
Discussion Starter · #5 ·
Bernie says, after all the work it needed I should weather the snot out of it.
 

·
Registered
Joined
·
264 Posts
Is that flat stock brass for the stantions? If so, where did you get it from?
Myself, I wouldn’t “weather the snot out of it.” Too pretty-lol. Just a nice dusting like its been running through rain and dirt, mostly at the bottom.
Btw, nice job, as usual.
 
1 - 7 of 7 Posts
Top