Model Train Forum banner

Cab-1 Technical manual

1857 Views 1 Reply 2 Participants Last post by  T-Man
I dropped one of my CAB-1's and it stopped working.:eek: I opened the case and see a red wire broken off the round disk which is imbedded in the back case and also has a black wire soldered to the disk.:eek: What is this round disk? :confused: Can anyone source the technical manual for the CAB-1? I found the original Patten data sheets on line but does not help.:eek:hwell: When I try to solder the red wire to the disk, the disk will not tin and the solder will not stick to the disk.:mad:

Denny Todd
Las Vegas, Nv.
1 - 1 of 2 Posts
1 - 1 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top