[ennisdavis]

Well I thought I had it made when I created a center pickup for my mack railbus, then I realized I will need two

that are separated or it wont pass over a switch. Gosh. So I need a roller contact that is spring loaded that goes up and down, from the track up towards the sky. Any of you seen such a device?

 

[rrswede]

See The Train Tender - Part Photos Jeff Kane may have what you want. Harry Henning at HENNING'S TRAINS could also be a source.

swede

 

[ennisdavis]

I have found that most suppliers like harry want a PN. They dont have the time to dig through boxes.

 

[Millstonemike]

Easy enough to get one. You just have to "dig through" Olsen's to find a pic of the part you need.

 

[rrswede]

I have found that most suppliers like harry want a PN. They dont have the time to dig through boxes.

I have never found Harry or Jeff unwilling to assist me to identify a part they may have, most especially, if I can send a photo of what I would like to buy. They both go over backward to assist. IMO.

swede

 

[gunrunnerjohn]

You show Harry a part and he knows the part number. He's a walking encyclopedia of pre-war and post-war parts! Jeff is no slouch either, I've gotten lots of stuff from him over the years.