Model Train Forum banner

DCC and DC

914 Views 9 Replies 6 Participants Last post by  Jscullans
I have a DC layout with blocks. Can I connect a DCC system on top of the DC and use either one I want? Not at the same time of course.
1 - 1 of 10 Posts
It is also important that no DC loco is standing idle on
the DCC track. The motor can be seriously damaged.
It is recommended that you have special spur tracks
than can be 'turned off' so you can park your DC
locos safely.
I can see that happening very easily, even with experience MRR's. ;)

IOW's think twice about doing this.:smilie_daumenneg:
1 - 1 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top