[Burt]

Ok, I got dyslexic and gave the incorrect path before. Concerning whether my 126 and T-126 have a DCC upgrade already I do not know? Still not sure. presuming this is a 1958 Engine from Tenshodo would the 4884 have come bulit with the three wire pigtail from the engine to the Tender or is this an add on DCC? Here are two pictures, sorry for the blur.

 

[Dennis461]

My upgrades use a 5 wire connector.
2 for motor
2 for headight
1 for frame pickup.

You have four 3 on pin and the drawabar

 

[Burt]

My upgrades use a 5 wire connector.
2 for motor
2 for headight
1 for frame pickup.

You have four 3 on pin and the drawabar

Ok, I see that but what are these for?

 

[Burt]

The 126 and T-126 came with this set up...First used Engine i have ever purchased...I have the engine and tender nothing else.

 

[Conductorkev]

Burt as i said in other thread it is for power pickup. Is there a light on the tender because I think 2 are for a light.
As far as dcc the only wY you will know if it's dcc is by removing the shell from the engine. If you do not feel comfortable doing that take it to your local hobby shop.