Model Train Forum banner

Found - heaps of old trains

2482 Views 7 Replies 4 Participants Last post by  shaygetz
Hi, my father recently passed away and after sorting through allot of stuff I stumbled over (N gauge) about 200 coaches, 200 stocks and about 30 locos a ton of track, about 3 or 400 pieces. 5 boxes full all in all. Most of them are in mint condition or close to, never been used or run. I think he collected them and never settled down so never managed to build a thing out of them. Where would I get information on voltage to run the trains at or prices if I want to sell them perhaps? Most of them are Lima, Arnold, lone star, sigma and a few others from the 1960's to 1980's all in original packing. Any idea what to do with it all?
1 - 4 of 8 Posts
Also...

Where would you guys reccomend buying stuff from, like straight track ( only have about 20 pieces of that long flexi stuff) and trees, scenery etc online or from a store. I live in australia, perth and the hobby shops that i've seen seem to charge an arm and a leg for alot of the pieces. Like i have about 300 curved pieces and they are like $10 for 1 piece in the hobby shop, isnt that a bit steep?
Thanks!

cool, thats awesome thanks. All the locos run so I'm happy, thanks. Yer, the online prices too for track are about 60-80% cheaper than in the stores here. Thats shocking.
hyia

Yep, um I got a 9v battery like you had, then I got a clip from an old toy and tore it out pluged it in, tested it on my tongue, it worked. Then touched it to the bottom of the trains wheels on the left and right side but none of the trains worked. is it possible all the trains are broken? or am I doing something wrong?

Welcome to the forum.

An Ebay sale would net you the most for what you have---not necessarily what any collector books will tell you. Being from Oz, the track you have is probably Horny, or Flieschmann and your prices are going to be high. I'd consider online stores for your needs.

Voltage is easy...12 volts for DC systems, 30 volts AC for Marklin. I don't believe 6 volt DC was still out there by the 1960s. An easy tester can be made from a 9 volt battery and some alligator clips.



It'll give enough juice without risking burning up a motor. I hope that helps a bit. Please feel free to PM or email me for any further help. My blog also has some good sources of information on the lower right posted for you to consider.
1 - 4 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top