Model Train Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
331 Posts
I, too, am going close to the edge. This picture shows a lot:
Sleeve Wood Headgear Jewellery Bridal accessory


That sheet of flexible clear plastic is from Hobby Lobby at $6.99. I plan to cut it using a straightedge and razor knife and glue/screw it to the foam of that curve.

Also you can see the solution for the free sides of my table - - I am using 1/4" Hardboard (Masonite) as a fascia and having it stick up over the horizontal surface by one inch. Forum opinions seem to suggest that is plenty for HO trains.

I also bought (not shown) a G scale rail fence that I will put just inside the clear plastic to give a more finished look. Hope this helps! Always more than one way to skin a layout and some are more pricier than others!
 
1 - 1 of 1 Posts
Top