Model Train Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
79 Posts
Discussion Starter #1
Hi all. Still building up my HO trains a little so as to start a layout combined with O scale. Layout will be temporary until new building (Not real big) is completed.

Anyway, what I was wondering is this. I have two back to back 60102 Bachmann Diesels with DCC, and was wondering how a 'NON DCC' 'B' unit would run between them, when running under DCC control? I haven't seen any 'B' units with DCC. Is there any?

Anyway, I posted this, I believe yesterday, but it disappeared somewhere in the internet zone. Hope I don't end up with a double post on this.

Thanks for any information. Jack
 

·
Registered
Joined
·
10 Posts
The NON dcc B unit will not run with DCC A unit as the B unit will be getting full track power all the time.. Where as the DCC units will only get the power you send them. IN other words the track is hot all the time& your DCC controler tells your dcc on board eingen how much of that power to use. Bachman does make some B units you would have to look & see if its one you could use.
 
1 - 2 of 2 Posts
Top