Model Train Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
585 Posts
Discussion Starter · #1 ·
I searched and not too many posts of this.

So I bought one from ebay. Track is removed and would like some guidance.

I looked at the unit and the controller is permanently attached but one stray wire.
 

Attachments

·
Yard Master & Research
Joined
·
11,868 Posts
Here is a link Coal Station,


Somehow you show a UCS track. You do not need it
Ordinary three rail track will work because the contacts are there and pop up through the track .
 

·
Yard Master & Research
Joined
·
11,868 Posts
I have done google images before but now I understand you. There are a few variations with different track. It was your pictures that helped me to find it.

I did find this diagram again a really good one.


Text Technical drawing Drawing Diagram Plan
 

·
Registered
Joined
·
585 Posts
Discussion Starter · #7 ·
I have done google images before but now I understand you. There are a few variations with different track. It was your pictures that helped me to find it.

I did find this diagram again a really good one.


View attachment 523760
ok so i have to find the track clamp down clips online or figure a way to clampit down on my own.

also center nylon pins to separate track power from accessory power...
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top