[srevac]

Can anyone tell me what is the best way to lenghten the switch wire on a Fastrack remote switch. Mine is located too far from my point of control. Thanks

 

[T-Man]

I read a manual. You need a four wire cable. I don't know if a Dealer would have cable extensions. All you have to do is determine the wire gauge. After that cut and splice or use a terminal board to join the cable ends. They can be found at Radio Shack. If you can't find a cable ,just go with four wires and use plastic ties to keep trhem together. They wire is around 18 or 20 gage, the wire should have the information on it.

 

[srevac]

Thanks very much for the information. I'll probably splice wire in. I thought there might be an extension available. I've enjoyed the Forum and the information it provides. Thanks