Model Train Forum banner

NCE Procab potential setup. Will it work?

1248 Views 5 Replies 6 Participants Last post by  spikedrivingblues
I recently got an NCE Procab, but it didn't come with anything but the handheld. I'd like to use it on my layout without buying a Powercab so I think I may have found a solution.

1. NCE Powercab connection panel
2. NCE Powercab connection panel power supply
3. Track power connector from the connection panel

If I plug the Procab into all of this, will it work?
1 - 1 of 6 Posts
I would suggest getting the NCE Powercab Starter Set. You will like having an additional cab.
...and if you later buy an SB5 you can save the flat cable and PCP panel from the starter set and use them to power a detached program track.

You will get plenty of use from your procab but a power cab starter system is pretty handy
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.