Model Train Forum banner

1 - 14 of 14 Posts

·
Registered
Joined
·
700 Posts
Discussion Starter #1
Attached Thumbnails
Click image for larger version

Name: 03F816A7-2BB6-403D-9624-CB5E7B25BEF5_1578612570810.jpg
Views: 1
Size: 190.3 KB
ID: 521588

Click image for larger version

Name: 4CC5FEA8-C318-4A5A-8191-EEF2ED9C4731_1578612592112.jpg
Views: 1
Size: 126.9 KB
ID: 521590

Click image for larger version

Name: 7E4EAC7D-0899-4BED-95C1-50661F1C5C90_1578612609081.jpg
Views: 1
Size: 148.1 KB
ID: 521592

Click image for larger version

Name: CC15FD2A-FCF2-439C-BC93-BC2CD9C74608_1578612635851.jpg
Views: 1
Size: 177.6 KB
ID: 521596

Click image for larger version

Name: 16862110-FF29-4488-BDE3-A910737D6C1F_1578612662100.jpg
Views: 1
Size: 186.1 KB
ID: 521598

Click image for larger version

Name: 69274F65-9FC8-487A-94A8-BA4E4DB298D2_1578612679678.jpg
Views: 1
Size: 116.0 KB
ID: 521600
 

·
Registered
Joined
·
700 Posts

·
Registered
Joined
·
700 Posts
Discussion Starter #6
if you know how to hide the cords ¨realistically¨ pls tell me they have been bothering me FOREVER
 

·
Registered
Joined
·
3,601 Posts
hide the cords ?? easy, i -think- anyways, lol
if the table top is layers of foam [ it looks like it] just go straight down and the sideways ??
 

·
Registered
Joined
·
700 Posts
Discussion Starter #8
hide the cords ?? easy, i -think- anyways, lol
if the table top is layers of foam [ it looks like it] just go straight down and the sideways ??
ok that will work:smilie_daumenpos:
 

·
Registered
Joined
·
700 Posts
Discussion Starter #10
Oh boy, haven’t been into this thread in a long while, If only my typing wasn’t so atrocious, then maybe the thread would be bearable to look at.
 

·
Registered
Joined
·
700 Posts
Discussion Starter #12
Partly, yes. It was supposed to be a more mountainous area, but I gave up back in March because of the cost, and the fact that I ran out of track halfway through constructing it.
 

·
Registered
Joined
·
4,723 Posts
Annie, it looks good. The problem I see is how close the track is to the edge of the board. At some point, you will experience a derailment, and your engine(s) and rolling stock will fall to the floor. I suggest you immediately design some sort of railing or fence to encircle the board to keep loose trains from destruction. Good luck!
 
1 - 14 of 14 Posts
Top