Model Train Forum banner
1 - 3 of 3 Posts

· Registered
Joined
·
763 Posts
Discussion Starter · #1 ·
After many requests we decided to bring the O Scale Haulers back for 1 more run. If you missed out last time, don't wait this time. When this run is gone, thats it!

www.oscalehauler.com

It's that time of year when people are going to train shows and setting up their own trains at home. O Scale Hauler is the ultimate solution for transporting or storing your trains.
 

Attachments

· Registered
Joined
·
763 Posts
Discussion Starter · #3 ·
If you already have some Haulers and have trouble removing the trays from their base, you can cut/drill some holes in the tray dividers.

I drilled 1" holes at each end of the dividers, 2" down from the top, and 2" in from the ends. This way the foam covers the holes but you can easily get your fingers in there to lift the trays out.

If you do this little trick, I strongly suggest you glue the flaps on the ends of the tray down so there is no chance of them popping out while you are pulling upwards on the dividers.
 

Attachments

1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top