Model Train Forum banner

Painting ?

1663 Views 11 Replies 5 Participants Last post by  T-Man
Once the boiler has been stripped, sanded, buffed, and primed, do you wipe it down between coats of finish with anything to remove and fingerprints/oils?
1 - 1 of 12 Posts
I just make sure that I never touch something I am painting with my bare hands again once the bare shell has been watched... When I am ready for the next coat, I just blow any contaminants off with compressed air... But this is just me :dunno:
1 - 1 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.