Model Train Forum banner

Pilot truck for Tyco loco

1190 Views 2 Replies 2 Participants Last post by  tkruger
I have a Chattanooga 0-8-0. It is the second edition (first without the pilot truck). Is there anyway to add a pilot truck to it and what one? I was thinking of using a self taping screw to attach it. The locomotive runs better than new after a little work was done to it. It is a good puller. I want to pull seven grain cars and a caboose with it.
1 - 1 of 3 Posts
Hi T,

Is this your locomotive?

Do you already have the pilot truck. If not, maybe you could write the manufacturer and see if they'll sell you the part. Should be pretty simple to install it if the casting already has the clearance built into it.

(Just a side note from the site with the picture... It was voted "HO Locomotive of the Year" and "Product of the Year" by readers of Model Railroader magazine.) :)

See less See more
1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.