Model Train Forum banner


939 Views 2 Replies 3 Participants Last post by  tankist
with wiring all per what the diagram says, what would cause a train to stop at 2 insulators while the currents of travel/direction are both facing in towards the insulators?
1 - 1 of 3 Posts
Something is wrong. You might have a reverse loop. When a train enters, the track polarity must be switched for the train to exit. Why are the insulators there? You need a double throw double switch toggle to correct. Without seeing I guess on the reason. Just due to lack of pertinent info. But you know the problem and I have told you how to fix it.
1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.