Model Train Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
12 Posts
Discussion Starter #1 (Edited)
Hi,

Since 5 years RAILNSCALE is active in designing and selling 3D printed kits for N scale (1/160 and 1/148), as well as TT scale (1/120).

As we celebrate our 5 year anniversary we would like to show you our celebration kits which happen to be 25% off until September 2nd, 2018.

N2508 - SET Golden Twenties (1/160)
With the SET Golden Twenties you create an authentic cityscape from around 1925.
The set contains a bread tricycle with baker’s man, a Phänomobil Reichspost, a horse with domestic waste carriage, a Renault OS gardeners truck, a Daimler DR4-5d Marienfelde spray truck with crew, and a kiosk.




All models are uncoated 3D printed models that consist of several parts. This makes painting easy.
Tips and construction instructions can be found on the product page: https://railnscale.com/2018/08/17/5-years-anniversary-set-golden-twenties/

N2737 - SET East European Vehicles (1/160)
The set contains a Simson KR51 “Schwalbe”, a Polski Fiat 126p. a Zastava 750, a Škoda 120 LS, a Škoda 105 L with HP 350.01, and a Tatra 148 S3.




T2737 - SET East European Vehicles (1/120)
The same kit as above, but enlarged to suit 1/120 layouts.

All models are uncoated 3D printed models that consist of several parts. This makes painting easy.
Tips and construction instructions can be found on the product page: https://railnscale.com/2018/08/17/5-years-anniversary-set-east-european-cars/

Best regards,
Joris & Maurice | RAILNSCALE | https://railnscale.com/
 

·
Registered
Joined
·
12 Posts
Discussion Starter #2
Hi,

This time I'd like to show our Jeep Wagoneer and Cherokee models.

Jeep Wagoneer & Jeep Cherokee (Era IV)
Long before the abbreviation SUV (Sports Utility Vehicle) was invented Jeep sold such cars. The Jeep (Grand) Wagoneer remained almost unchanged during its production period from 1962-1991. Between 1974 and 1983 it cheaper sibling, the Jeep Cherokee was offered.
The following unpainted kits are available:

N2288 – Jeep Wagoneer 1974-1978




N2289 – Jeep Cherokee 1974-1978




N2788 – SET 2x Jeep




All models are uncoated 3D printed models that consist of several parts. This makes painting easy.
Tips and construction instructions, and free decalls as downloads can be found on the product page: https://railnscale.com/2017/07/07/jeep-wagoneer-cherokee/

Best regards,
Joris & Maurice | RAILNSCALE | https://railnscale.com/
 

·
Registered
Joined
·
12 Posts
Discussion Starter #3
Hi,

Next to cars RAILNSCALE offers a wide range of pavement tools.

Street paving rollers
With these rollers you can easily build paved roads. There are many variants. Some rollers are designed for making pavements between the street car rails. The rollers are suitable for both straight and curved tracks. Role DAS or Darwi Classic modelling material and print the desired road pattern in the wet clay.

Various versions are available. For example: row paving, arc paving, stretcher bond, herringbone bond, asphalt, wooden road, and mixed pavements. The photos show some examples:






This demonstration video shows how the tools work:

Street paving stamps
For smaller areas stamps are sometimes easier. Again several different patterns are available.




This little video explains a bit about the stamps:

Visit our website and learn more about RAILNSCALE Construction tools: https://railnscale.com/construction/
or check out the Construction brochure: https://railnscale.files.wordpress.com/2017/09/construction_catalogue_20170924.pdf

Best regards,
Maurice
 

·
Registered
Joined
·
12 Posts
Discussion Starter #4
Hi,

Great tiny products for tiny great prices!
Even in small scales big is better. But don’t forget the little products that enhance your layout. Did you know that RAILNSCALE offers over 80 products under $7? Check out our tiny ones.


Link to our brochure with little ones: https://railnscale.files.wordpress.com/2018/08/brochure-little.pdf

Best regards,
Maurice
 

·
Registered
Joined
·
12 Posts
Discussion Starter #5
Hi,

Yes, we offer the initial Volvo 200 series for quite some time. Now we introduce the final version of the Volvo 240 (1986-1993).
Compared to the original version, the model is different on all sides. Just like the original, the scale model has mouldings on the sills, which are attached to the chassis for ease of painting. Compared to the older models, the interior is a bit further detailed.

The following kits are available:
N2315 - Volvo 240 Sedan




N2316 - Volvo 240 Wagon




N2317 - Volvo 240 GLT Wagon with roof box
In Europe -and certainly in Scandinavia- a Volvo with a roof box is not an uncommon site. Apart from the roof box, the Volvo 240 GLT Wagon has some unique features like the five spoke alloys and fog lights.



N2815 - SET 3x Volvo 240
The set comprises a 240 Sedan and Wagon



All kits are unpainted 3D printed kits comprising two parts for easy painting. Learn more about this kits here: https://railnscale.com/2018/09/01/volvo-240-series/

Build instructions & tips: https://railnscale.files.wordpress.com/2018/09/n2315instructions.pdf

More interested int he older models? No problem: https://railnscale.com/2015/01/24/n2222-u2223-volvo-200-serien/

Kind regards,
Maurice
 

·
Registered
Joined
·
12 Posts
Discussion Starter #6

·
Registered
Joined
·
12 Posts
Discussion Starter #7
Hi,

NEW
Replacement buffers for Roco passenger wagons (for example art. nr. 24200). The kit contains flat and convex buffers (insert diameter 1 mm). The flat buffers should be mounted on the left side (seen in driving direction) of each wagon end. The convex buffers are placed on the right side. The buffers can be inserted directly into the recesses. Super glue is not required. Models are delivered unpainted and are printed in highly detailed FXD.
Two sets are available:

N8104 - 8 Replacement buffers



N8604 - 16 Replacement buffers (discount set)


More: https://railnscale.com/2018/09/09/ersatzpuffer-n-1160/

Best regards,
Joris & Maurice | RAILNSCALE | https://railnscale.com/
 

·
Registered
Joined
·
12 Posts
Discussion Starter #8
Hi,

NEW: MB Trac 1300
The MB Trac 1300 was manufactured between 1976 and 1991. The MB Trac was mainly used in agriculture. Furthermore, these tractors were also used in forestry and in municipalities and construction companies. The model consists of multiple unpainted parts.

The following kits are available:
N2370 - MB Trac 1300



N2868 - SET MB Trac 1300 & Joskin Modulo2 slurry tank



N2869 - SET MB Trac 1300 & trailer



Interested? More information is available here: https://railnscale.com/2018/09/14/mb-trac-1300/

Best regards,
Maurice
 

·
Registered
Joined
·
12 Posts
Discussion Starter #9
Hi,

I have painted the kits. Therefore I would like to show some images. Meanwhile the trailers are also available without MB Trac. The program contains the following unpainted kits:

N2370 - MB Trac 1300



More: https://railnscale.com/2018/09/14/mb-trac-1300/

N2368 - Joskin Modulo2



N2868 - SET MB Trac 1300 & Joskin Modulo2



More: https://railnscale.com/2018/09/22/joskin-modulo2/

N2369 - Agricultural trailer



N2869 - SET MB Trac 1300 & Agricultural trailer



More: https://railnscale.com/2018/09/22/agricultural-trailer/

All kits are unpainted.
Best regards,
Maurice
 
1 - 9 of 9 Posts
Top