Model Train Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
374 Posts
Discussion Starter #1
I painted my 350 royal blue came out nice i will post pictures latet iam working at my other job tonight. So i replaced centric links bought the revits plus spares meat to ask before if anyone knows a easier way. To put revits on. I did it but wadnt pretty train works good i used the wack couldnt do straight up and down had angel it. Anyone if there is a tool or another way. Thanks

Al
 

·
Registered
Joined
·
5,736 Posts
If you can squeeze a roll pin punch with the appropriate size, it should work. I replaced that same linkage on my Royal Blue and I think I used a roll pin punch. I've seen small rivet setters that you squeeze or turn a screw type mechanism and that flattens out the rivet.
 

·
Registered
Joined
·
374 Posts
Discussion Starter #6
If you can squeeze a roll pin punch with the appropriate size, it should work. I replaced that same linkage on my Royal Blue and I think I used a roll pin punch. I've seen small rivet setters that you squeeze or turn a screw type mechanism and that flattens out the rivet.
Ok thanks next time i will try it thanks again stay safe

Al
 
1 - 6 of 6 Posts
Top