Model Train Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1,483 Posts
I recall an article in Model Railroader Magazine some years back. As I recall the larger truck engines, the SD's, the Dash-8's and 9's, the AC8800's and longer steamers needed a minimum 24" radius, some actually requiring a 30" radius. You may get by with a 22" radius but would have to maintain lower speeds.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top