Model Train Forum banner
1 - 1 of 1 Posts

·
Admin
Joined
·
47,849 Posts
The body should be easy to remove, a few screws. If you look at the manual for the actual model you have, it'll show you where the body screws are.

BTW, what's a U38?

As far as removing the paint, you don't really have to remove much paint as a rule. You can use Isopropyl Alcohol and a rag to scrub off selected paint areas, usually only the lettering might be an issue if it's raised. Other than that, just paint over it.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top