Model Train Forum banner
1 - 5 of 5 Posts

· Registered
Joined
·
654 Posts
Correction to my earlier post, as the instructions was for the Walthers mainline gp9...that being said I have a Walters gp15 shell, and it has mounting lugs at the front and back(2 screws in the front, 2 in the rear). I’ll post a photo later, and hopefully this shell is like the one you have..cheers
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top